Shopping Cart
0 items
 

Plug & Play PID Temperature Controller Box with SSR Output Circuit Breaker Heat Sink Thermocouple K type (2" Tip SS) Probe Sensor for Heater or Cooler

Plug & Play PID Temperature Controller Box with SSR Output Circuit Breaker Heat Sink Thermocouple K type (2" Tip SS) Probe Sensor for Heater or Cooler
Click to enlarge
Price: $134.00
Availability: In Stock
Model: CKP-DTA-P&P-EGT
Average Rating: Not Rated

This plug and play temperature controller with high temperature 2" probe , has a wide range of applications in controlling the temperature of Kilns, Ovens, Furnaces & …. (for loading current up to 15Amp) . This is an inexpensive and heavy duty plug and play controller box. Please consider that if you need to change your sensor to specific one, I can change it for you too.

 

Features & Specifications:

 

·      Its heavy duty thermocouple can measure very high temperatures up to 1800 °F (1000 °C).

·      To operate, you only need to plug the heater to the socket wire of the controller at the back, drop the sensor into the Kiln, turn on the power of controller and adjust it to your own requirements.

·         15 Amp Maximum current  

·         Heavy duty input and output plug and socket wire

·         Equipped with circuit breaker switch 15Amp (instead of short life fuse)

·         Equipped with 40amp SSR with Heat sink

And more:

High Measuring accuracy, ±0.2% or ±1 unit of full input range

Decimal points for all input signals. So, you have 0.1 resolution for your K type thermocouple

Output graphic bar indication (Output1 % percentage value indication)

Celsius or Fahrenheit display selected on user’s discretion. Also equipped with A parameter (like for measuring pressure for pressure transmitter)

 

Calibration function for sensor temperature correction ,

Overshoot protection for first power on or SV modify later,  And more functions

 

Specifications: 

Input voltage

90 to 260 VAC - 50 /60 Hz; No transformer or adaptor is required.

Output voltage

Same as the input.

Maximum Current

15A

Controller Mode

  1) :P, PID ,PI, PD, ON/OFF(P=0)       2) Auto setting control

Output switching device

Solid State Relay (40A - 24/240V AC) with zero voltage crossing switching.

Sensor Type

Type K 6pc Ceramic Kiln Thermocouple

Thermocouple control range

50 to 1000 °C (-58 to 1800 °F)

Sensing tip length

1.9" (48mm)

Sensing tip diameter

0.19" (5mm)

Sensor cable length

6 ft (2m)

Sensor Thread width

M8

Sensor Cable External shielding

Metal Shield (Stainless steel braided)

Control Output

Out1= SSR (heating or cooling side)

Box material & Dimension

ABS     195 (L) x 145 (W) x 100 (H) / (7.75" x 5.75" x 4")

Temperature resolution

Dual 4-digit LED display, 0.1 for K type and 0.001 for analog input

Temperature display unit

Fahrenheit (°F) Celsius (°C)  and A parameter

Temperature accuracy

Measurement: ±0.2%FS   Control Accuracy :+/- 1 Celsius 

 Input

K (-200~+1000ºC) . But the controller can connect to following input too,

S (-50~+1600ºC), Wu3-Re25 (0~2000ºC ), R (-50~+1700ºC), T (0~400ºC), E (0~900ºC), J (0~800ºC), B (200~1800ºC), Pt100 (-200~800.0ºC) or (-200~+600ºC), mV,mA,VDC (-1999~+9999)

 

Notes for customer outside North America,

  • For international order, an US power cord is included. User can cut plug and socket wire and change it to the power plug and socket outlet that meets the local standard for the input and output. 
  • For countries that use 220-240VAC power line, the maximum control power of this controller is 3500 Watts.

 

Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Plug & Play PID Temperature Controller Box with SSR Output Circuit Breaker Heat Sink Thermocouple K type (2" Tip SS) Probe Sensor for Heater or Cooler
Click to enlarge
Plug & Play PID Temperature Controller Box with SSR Output Circuit Breaker Heat Sink Thermocouple K type (2" Tip SS) Probe Sensor for Heater or Cooler
Click to enlarge