This heavy-duty plug-and-play temperature controller with a circuit breaker has a wide range of applications for controlling the temperature. It can work for any application of controlling heat and cold with a temperature range of -22 to 572 F ( 0 to 300 degrees C ).


You can select between 10, 15, or 20Amp/120VAC and also with or without a waterproof cover for outside use.

 

Main Features:

·          To operate, you only need to plug the heater or cooler into the socket wire of the controller at the back, drop the sensor into place, turn on the power of the controller Box, and set up the controller to your own requirements.

·          10, 15 or 20 Amp Circuit Breaker switch for safety(please select)

·          Heavy duty input and output plug and socket wires

·          With or without a waterproof cover for outside use (Please select)

·          It equipped with 2 types of timer 

·         Configurable between Fahrenheit or Celsius

·          Heating or cooling function (configurable)

·          It is the accurate controller with 0.1 C or 0.1 F resolution controlling

·          Temperature Calibration

.          Equipped with buzzer alarm for high or low-temperature alarm setting


 

This thermostat simply turns off the Heater or cooler when it reaches the specified temperature.

 

We will ship the temperature controller with 110 V or 220 V versions based on the voltage of your country. For example, if you are customers from the United StatesCanadaMexicoJapan, Venezuela, and Taiwan, we will ship 110 V versions. For customers from EuropeAustraliaNew Zealandmost Asian CountriesSouth America and Africa, we will ship 220 V versions.

 

Temperature Controller Specifications

 

  • Temperature Measuring Range: 

    -22 to 572 F ( 0 to 300 degrees C )

  • Control temperature range: 

    -22 to 572 F ( 0 to 300 degrees C )

     (adjustable)
  • Control temperature difference: 0.1 - 25 degrees (adjustable)
  • controlling Resolution: 0.1 degree
  • Timer : 0-999 minutes
  • Sensor error delay: 1 minute
  • Compressor delay protection time: 0 ~ 10 minutes (adjustable)  
  • Storage Temperature: -30 ~ 75 °C
  • Operating Relative Humidity: 20 ~ 85 % (No condensation)  
  • Power Supply: 100-120 V AC/DC (depends on your country)
  • Power consumption: < 2 W
  • Cable length: 3 m (near to 10 feet)
  • Equipped with AH or AL buzzer alarm (Higher or Lower temperature alarm setting) 


 Thermocouple Specification

  • Measurement range: 

    -22 to 572 F ( 0 to 300 degrees C )

     
  • Cable length (L): 10 ft ( 3m ) 
  • Sensor type: Negative Temperature Coefficient NTC sensor  100K


Notes for customers outside North America,

 

  • For international orders, a US power cord is included. Users can cut the plug and socket wire and change it to the power plug and socket outlet that meets the local standard for the input and output.
  • For countries that use 220-240 VAC power lines, the maximum control power of this controller is 1100 Watts.

Manual & wiring diagram

Write a review

Note: HTML is not translated!
   Bad           Good

Plug & Play Digital Waterproof Temperature Control Box 10, 15 or 20Amp/120VAC Power Thermostat for Controlling Cooling or Heating Devices

  • Product Code:PPDIN300-C
  • Availability:In Stock
  • USD71.00


Available Options


Related Products

Plastic NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor  Water Proof Probe

Plastic NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor Water Proof Probe

It will work in water like aquarium, water tank,...  Specifications:   ..

USD7.50

NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor Cylinder Probe for Dish Washer Washing Machine Dryer

NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor Cylinder Probe for Dish Washer Washing Machine Dryer

  Specifications:   Measurement range: -58 to 302 °F (-50 to 150 °C) ..

USD6.50

NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor  Copper Washer Type Probe

NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor Copper Washer Type Probe

This fast response  washer sensor has a wide range of application and easily install in every p..

USD8.50

Plug & Play Digital Humidity Controller Dehumidifier or Humidifier for Greenhouse Pet Animal Attic with Buzzer Alarm Limits

Plug & Play Digital Humidity Controller Dehumidifier or Humidifier for Greenhouse Pet Animal Attic with Buzzer Alarm Limits

This heavy duty plug and play controller serves the purpose of monitoring and controlling temperat..

USD85.00

1/4" Plastic ABS NTC 10K Sensor fr Underfloor heat thermostat, Air, Refrigerator, Aquarium Waterproof Probe

1/4" Plastic ABS NTC 10K Sensor fr Underfloor heat thermostat, Air, Refrigerator, Aquarium Waterproof Probe

The Sensor works with most thermostats (INCLUDING ALL "WARMUP" THERMOSTATS). Please check the resist..

USD7.99

NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor  Copper Washer Type Probe

NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor Copper Washer Type Probe

This fast response ( copper washer connection )sensor has a wide range of application and easily ins..

USD7.50

NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor for Air or Water Screw Type Probe

NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor for Air or Water Screw Type Probe

  Specifications:   Measurement range: -58 to 230 °F (-50 to 110..

USD9.50

Waterproof Plastic NTC Sensor 10K with 2.5mm connector

Waterproof Plastic NTC Sensor 10K with 2.5mm connector

It will work in water like aquariums and water tanks,...  Specifications:   ..

USD8.50