Shopping Cart
0 items
 

Digital 1/32 Din Temperature Controller Pyrometer 12VDC with K Type EGT Probe 2"

Digital 1/32 Din Temperature Controller Pyrometer 12VDC with K Type EGT Probe 2"
Click to enlarge
Price: $54.99
Availability: In Stock
Model: DT-12V-EGT
Average Rating: Not Rated

Digital EGT Temperature Controller with K Type EGT Probe

The item has supper mini size 1/32 DIN (1x2x3" or 22.5 x 45 x75mm) for using on any kind of project that need small space like the car panel and Exhaust Gas Temperature (EGT) monitoring, small kilns that has small space for installing temperature controller

It can be powered directly by any battery 12 VDC.  It shows current temperature and also you can set your alarm temperature or set point too. The device will turn on a red output LED in the front panel to get attention if the temperature is above your set point and also you can set another over alarm for alarm output . So, It has 2 relay switch, one relay output and also one over alarm relay output  that each output switch separately can be used to turn on a buzzer, shut off the fuel, or turn on a cooling fan.  The meter will accept almost all type sensors (please check the following table) on the market and display the temperature on Fahrenheit or Celsius.The max temperature range for this device with K type probe is 2372 F (1300 C)

Item includes an EGT K type thermocouple probe.  The probe has 2” long. Cable length(2 meters) with Maximum working temperature: 1832F (1000C) .

Control Method

PIN control (including ON/OFF, step-type PID and continuous PID) Self-tuning control

Detective

Temperature Range

32 to 2372 F or 0 to 1300 °C (with K type)

Display

Red, 4 Digit, C or F degree ,Process value (PV), Setting value (SV) Output, alarm and self-tuning can be indicated by: LED

Input Signal

Thermocouple: K,E,S,B,J,T,R,WRe3/25, RTD, Pt100, Cu50

Accuracy

±0.2%F.S and display resolution is 0.1 C or 0.1 F degree

Control Way

PID with over and under temperature alarm output

Output mode

8VDC, 30mA (short circuit) for driving SSR module

Also Equipped with a built-in relay (3Amp).

Out1= switchable between buit-in Relay or external SSR

Alarm output

High limit alarm, lower limit alarm,

Proportional Band

0.1-99.9%

Integration time

2-1999 S

Derivative time

1-399 S

Working Power

12VDC

Out Dimension

1x2x3" or 24x48x75 mm compact size

Operation Ambient

0-50C , <RH85%

 

EGT Probe Specifications:

 

  • Measurement range: 32 - 1800 °F (0 - 1000 °C)
  • Thermocouple Type: K Type
  • Cable length : 6 ft 
  • Sensing tip length: 1.9" (48mm)
  • Sensing tip diameter: 0.19" (5mm)
  • Thread width :  M8
  • Internal Insulation: Fiber Glass
  • External shielding: Metal Shield (Stainless steel braided)

 Manual

 
Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Digital 1/32 Din Temperature Controller Pyrometer 12VDC with K Type EGT Probe 2"
Click to enlarge