Shopping Cart
0 items

Washer Thermocouple CHT Probe Sensor Cylinder Head Temperature

Washer Thermocouple CHT Probe Sensor Cylinder Head Temperature
Click to enlarge
Price: $14.50
Availability: In Stock
Model: CHT-10-752-FP
Average Rating: Not Rated

The Cylinder Head Temperature Sensor (CHT Sensor) is designed for surviving high vibration and temperatures up to 752 °F (400 °C). The sensor will fit most 14 mm spark plugs. This sensor is to be installed between the cylinder head and spark plug hex to monitor cylinder head temperature (CHT).


The sensor cable is over-braided in stainless steel for heavy-duty abrasion resistance. The signal wires are Teflon insulated. Designed to deliver high performance, high temperature measurements, reliably and consistently in the most extreme operating conditions.


CHT sensors are widely applied for professional racing teams and R&D test labs. It can also be used for many different applications, including - but not limited to - Karts, Drag Racing, Formula 1, NASCAR, Off Road, Snowmobiles, and Boat Racing.






Under the Spark Plug Type K

Measuring Temperature

32 to 752 °F (0 to 400 °C)

Ring inside diameter

10 mm (~ 0.4 inch)

Cable length (L)

1m (3.3 ft) with Flat pin connector 

Internal insulation

Fiber Glass

External shielding

Metal Shield (Stainless steel braided)

Write Review
Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

There are no additional images for this product.