Warning: unlink(/home3/thermo/cacheThermomart/storage/cache/cache.dmt.catdata.63.1749915793): No such file or directory in /home3/thermo/public_html/system/library/cache/file.php on line 17Warning: Cannot modify header information - headers already sent by (output started at /home3/thermo/public_html/system/framework.php:42) in /home3/thermo/public_html/catalog/controller/startup/session.php on line 25Warning: Cannot modify header information - headers already sent by (output started at /home3/thermo/public_html/system/framework.php:42) in /home3/thermo/cacheThermomart/storage/modification/catalog/controller/startup/startup.php on line 128Warning: Cannot modify header information - headers already sent by (output started at /home3/thermo/public_html/system/framework.php:42) in /home3/thermo/cacheThermomart/storage/modification/catalog/controller/startup/startup.php on line 188 Plug & Play Digital Temperature Control Box 20 Amp Relay Output Power Thermostat for Controlling Cooling or Heating Device
MikeExcellent I was getting a high temp reading of 140 and water was ice c…
BobBought this three years ago and always worked without a hitch. Had to…
Kayvon AmiriShocked it works so well for such a low price. No complaints!…
MortProduct worked great for my small lamp working kiln. Fast shipping fro…
BobThis is a great device that can end up saving us thousands of dollars …
SeanI do recommend this as a cheap solution ($46.00) to control overheatin…
KeithEasy to fit under appropriate bolt near the thermostat and run wiring …
Darl CrickIt’s been running for about 5 days now with no issues. Does exactly wh…
lxbfYeaaVery nice and accurate temperature recorder and controller.…
BarbaraI purchased a small pottery kiln with this controller installed on it …
Dropframe Great product! Got a prompt response via email that the polarity does …
Michael in CaliforniaCompared to $700 kiln controllers it's very low priced and beyond the …
DavidLove the controller it works as advertised. The average person may hav…
BrianBought over a year ago for gas fireplace at cottage, works without iss…
Andrew McCormickAs the previous commenter, this DOES operate as described and does so …
simpletonI installed this for a customer. Overall my client says it's warm and…
Bob DodsonI bought this unit a few weeks ago to monitor kiln temperature for rak…
TomThis sensor worked to fix my Intex inflatable spa after an E95 error c…
JimGreat little product. Simple wiring and effective. I mounted one in th…
mrgomezCheck my review on at https://youtu.be/-Gjj5VNkxVQ …
katacombzMade a DIY bbq smoker using this controller and posted some pictures h…
Randal ThomsonOnce installed it worked very well. I have fired my pottery kiln sever…
SteveOrdered this for a Condo Humidifier I built using a 12 head ultrasonic…
GarpI made an tutorial on a DIY electric bbq or smoker using this controll…
nvalerioThis kit is of the same quality but with much lower cost than other DI…
FrankHave used it numerous times with no problems at all. I bought this pac…

  This heavy-duty plug-and-play temperature controller with a circuit breaker has a wide range of applications for controlling the temperature. It can work for any application of controlling heat and cold with a temperature range of -22 to 572 F ( 0 to 300 degrees C ).


You can select between 15 or 20Amp/120VAC and also with or without a waterproof cover for outside use.

 

Main Features:

·          To operate, you only need to plug the heater or cooler into the socket wire of the controller at the back, drop the sensor into place, turn on the power of the controller Box, and set up the controller to your own requirements.

·          15 or 20 Amp Circuit Breaker switch for safety(please select)

·          Heavy duty input and output plug and socket wires

·          With or without a waterproof cover for outside use (Please select)

·          It equipped with 2 types of timer 

·         Configurable between Fahrenheit or Celsius

·          Heating or cooling function (configurable)

·          It is the accurate controller with 0.1 C or 0.1 F resolution controlling

·          Temperature Calibration

.          Equipped with buzzer alarm for high or low-temperature alarm setting


 

This thermostat simply turns off the Heater or cooler when it reaches the specified temperature.

 

 

Temperature Controller Specifications

 

    • Temperature Measuring Range:  

      -22 to 572 F ( 0 to 300 degrees C )

    • Control temperature range:  

      -22 to 572 F ( 0 to 300 degrees C )

        (adjustable)
    • Control temperature difference: 0.1 - 25 degrees (adjustable)
    • controlling Resolution: 0.1 degree
    • Timer : 0-999 minutes
    • Sensor error delay: 1 minute
    • Compressor delay protection time: 0 ~ 10 minutes (adjustable)  
    • Storage Temperature: -30 ~ 75 °C
    • Operating Relative Humidity: 20 ~ 85 % (No condensation)  
    • Power Supply: 100-120 V AC/DC (depends on your country)
    • Power consumption: < 2 W
    • Cable length: 3 m (near to 10 feet)
    • Equipped with AH or AL buzzer alarm (Higher or Lower temperature alarm setting) 


     Thermocouple Specification

    • Measurement range:  

      -22 to 572 F ( 0 to 300 degrees C )

        
    • Cable length (L): 10 ft ( 3m ) 
    • Sensor type: Negative Temperature Coefficient NTC sensor  100K


    Manual

    Write a review

    Note: HTML is not translated!
        Bad           Good

    Plug & Play Waterproof Temperature Control Box 15-20Amp/120VAC Power Thermostat,Control Cooling or Heating Devices

    • Product Code: PPDIN300-C
    • Availability: In Stock
    • USD91.00


    Available Options


    Related Products

    Plastic NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor  Water Proof Probe

    Plastic NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor Water Proof Probe

    It will work in water like aquarium, water tank,...  Specifications:   ..

    USD7.50

    NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor Cylinder Probe for Dish Washer Washing Machine Dryer

    NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor Cylinder Probe for Dish Washer Washing Machine Dryer

      Specifications:   Measurement range: -58 to 302 °F (-50 to 150 °C) ..

    USD6.50

    NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor  Copper Washer Type Probe

    NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor Copper Washer Type Probe

    This fast response  washer sensor has a wide range of application and easily install in every p..

    USD8.50

    Plug & Play Temperature & Humidity Controller Buzzer Alarm fr Dehumidifier or Humidifier Greenhouse Pet Animal Attic

    Plug & Play Temperature & Humidity Controller Buzzer Alarm fr Dehumidifier or Humidifier Greenhouse Pet Animal Attic

    This heavy duty plug and play controller serves the purpose of monitoring and controlling temperat..

    USD85.00

    1/4" Plastic ABS NTC 10K Sensor fr Underfloor heat thermostat, Air, Refrigerator, Aquarium Waterproof Probe

    1/4" Plastic ABS NTC 10K Sensor fr Underfloor heat thermostat, Air, Refrigerator, Aquarium Waterproof Probe

    The Sensor works with most thermostats (INCLUDING ALL "WARMUP" THERMOSTATS). Please check the resist..

    USD7.99

    NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor  Copper Washer Type Probe

    NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor Copper Washer Type Probe

    This fast response ( copper washer connection )sensor has a wide range of application and easily ins..

    USD7.50

    NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor for Air or Water Screw Type Probe

    NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor for Air or Water Screw Type Probe

      Specifications:   Measurement range: -58 to 230 °F (-50 to 110..

    USD9.50

    Waterproof Plastic NTC Sensor 10K with 2.5mm connector

    Waterproof Plastic NTC Sensor 10K with 2.5mm connector

    It will work in water like aquariums and water tanks,...  Specifications:   ..

    USD8.50