MikeExcellent I was getting a high temp reading of 140 and water was ice c…
BobBought this three years ago and always worked without a hitch. Had to…
Kayvon AmiriShocked it works so well for such a low price. No complaints!…
MortProduct worked great for my small lamp working kiln. Fast shipping fro…
BobThis is a great device that can end up saving us thousands of dollars …
SeanI do recommend this as a cheap solution ($46.00) to control overheatin…
KeithEasy to fit under appropriate bolt near the thermostat and run wiring …
Darl CrickIt’s been running for about 5 days now with no issues. Does exactly wh…
lxbfYeaaVery nice and accurate temperature recorder and controller.…
BarbaraI purchased a small pottery kiln with this controller installed on it …
Dropframe Great product! Got a prompt response via email that the polarity does …
Michael in CaliforniaCompared to $700 kiln controllers it's very low priced and beyond the …
DavidLove the controller it works as advertised. The average person may hav…
BrianBought over a year ago for gas fireplace at cottage, works without iss…
Andrew McCormickAs the previous commenter, this DOES operate as described and does so …
simpletonI installed this for a customer. Overall my client says it's warm and…
Bob DodsonI bought this unit a few weeks ago to monitor kiln temperature for rak…
TomThis sensor worked to fix my Intex inflatable spa after an E95 error c…
JimGreat little product. Simple wiring and effective. I mounted one in th…
mrgomezCheck my review on at https://youtu.be/-Gjj5VNkxVQ …
katacombzMade a DIY bbq smoker using this controller and posted some pictures h…
Randal ThomsonOnce installed it worked very well. I have fired my pottery kiln sever…
SteveOrdered this for a Condo Humidifier I built using a 12 head ultrasonic…
GarpI made an tutorial on a DIY electric bbq or smoker using this controll…
nvalerioThis kit is of the same quality but with much lower cost than other DI…
FrankHave used it numerous times with no problems at all. I bought this pac…
  • Plug & Play Humidity Temperature Controller Buzzer Alarm Moisture and fr Greenhouse Incubator Curing Chamber

This heavy duty plug and play controller serves the purpose of monitoring and controlling temperature and humidity levels. Equipped with a buzzer and flasher alarm, it alerts users when the maximum or minimum limits are exceeded, preventing potential damage. For example, if humidity rises in a basement due to a faulty dehumidifier or water leakage, the controller triggers an alarm sound. The same applies to temperature thresholds. It also has two relay outputs outlets for controlling temperature or humidity devices.

Additionally, the controller records the maximum and minimum temperature and humidity values during operation, allowing for better customization and efficient control.

This versatile unit empowers you to effortlessly regulate both humidity and temperature in your environment. Just plug this box into a wall socket and connect your Humidifier, Dehumidifier, and Heater or Cooler systems to its dual outputs. By doing so, you gain precise control over the humidity and temperature levels with convenience. The unit is equipped with a digital LCD display that provides clear readings of the current humidity and temperature degrees, enabling easy monitoring and adjustment as per your requirements.

 

Technical Parameters:

·         Accuracy: ±1°C, 0.1%RH

·         Power consumption: <3W

·         Temperature measuring range: -20°C to +80°C

·         Humidity measuring range: 0%RH to +100%RH

·         Sensors: Humidity and temperature sensor with 1m wire length

·         Power supply: AC 100-240V

·         Output: 2 outputs with 10 Amp load

Features:

·         Two relays with one sensor and two independent outputs

·         High and low buzzer alarm and flasher for temperature and humidity

·         Two-color display (red for temperature and blue for humidity)

·         Control of temperature and humidity by setting start and stop values

·         Temperature and humidity calibration

·         Recording of maximum and minimum temperature and humidity

·         Timer delay for each temperature and humidity output

·         Maximum current capacity of 10 Amp

·         Heavy-duty input and output plug and socket wires for durability

·         Equipped with a 10 Amp circuit breaker switch instead of a short-life fuse

·         Configurable functionality for humidifying or dehumidifying, and heating or cooling.

Setting Start and Stop Temperature and Humidity Modes: You can configure the start and stop temperature and humidity values using this mode. The controller automatically identifies the heating or cooling mode, as well as the humidifier or dehumidifier mode.

·         Heating mode: Start temperature is lower than the stop temperature.

·         Cooling mode: Start temperature is higher than the stop temperature.

·         Humidifier mode: Start humidity is lower than the stop humidity.

·         Dehumidifier mode: Start humidity is higher than the stop humidity.

Temperature and Humidity Calibration: The controller provides a calibration function for temperature and humidity readings. You can adjust the values within the range of -10 to +10, allowing for positive, negative, or zero calibration.

One Set Includes:

·         1 x Humidity and Temperature Controller

·         Sensor (Temperature and humidity sensor)

·         1 x Instruction Manual


         Manual

Write a review

Note: HTML is not translated!
    Bad           Good

Plug & Play Humidity Temperature Controller Buzzer Alarm Moisture and fr Greenhouse Incubator Curing Chamber

  • Product Code: PP-DIN302
  • Availability: In Stock
  • USD85.00


Related Products

Plastic ABS IP65 Enclosure Waterproof Dust proof Sealed Housing Case Electronic Electrical Project Big Box, 3 Glands

Plastic ABS IP65 Enclosure Waterproof Dust proof Sealed Housing Case Electronic Electrical Project Big Box, 3 Glands

Plastic ABS Enclosure Project Box & 3 Cable Glands  4-8mm     &nb..

USD15.50

Plastic NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor  Water Proof Probe

Plastic NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor Water Proof Probe

It will work in water like aquarium, water tank,...  Specifications:   ..

USD7.50

NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor Cylinder Probe for Dish Washer Washing Machine Dryer

NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor Cylinder Probe for Dish Washer Washing Machine Dryer

  Specifications:   Measurement range: -58 to 302 °F (-50 to 150 °C) ..

USD6.50

NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor  Copper Washer Type Probe

NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor Copper Washer Type Probe

This fast response  washer sensor has a wide range of application and easily install in every p..

USD8.50

Spa Hot Tub Jacuzzi Pool Water Temperature Screw type Sensor Probe

Spa Hot Tub Jacuzzi Pool Water Temperature Screw type Sensor Probe

  Specifications:   Measurement range: -58 to 230 °F (-50 to 110..

USD9.50

NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor Stainless Steel L shape & Pin Point Tapered Probe

NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor Stainless Steel L shape & Pin Point Tapered Probe

Temperature Sensor Probe 3m (10ft) with temperature range of (-50 to 150°C)   This ..

USD11.50

Water Proof Radiant Floor Heat Temperature Probe 10K for Aube Floor Sensor AC112-01 Honeywell

Water Proof Radiant Floor Heat Temperature Probe 10K for Aube Floor Sensor AC112-01 Honeywell

  Specifications:   Measurement range: -58 to 302 °F (-50 to 150 °C) ..

USD7.50

Screw Probe Temperature Sensor fr Hayward GLX-PC-12-KIT 10K or Pentair 10K GOLDLINE AQUA LOGIC SALT Replacement

Screw Probe Temperature Sensor fr Hayward GLX-PC-12-KIT 10K or Pentair 10K GOLDLINE AQUA LOGIC SALT Replacement

Water Temperature Sensor Probe with 3m (10ft) wire compatible with Hayward GLX-PC-12-KIT 10K or Pent..

USD9.50

Plug & Play Temperature & Humidity Controller Buzzer Alarm fr Dehumidifier or Humidifier Greenhouse Pet Animal Attic

Plug & Play Temperature & Humidity Controller Buzzer Alarm fr Dehumidifier or Humidifier Greenhouse Pet Animal Attic

This heavy duty plug and play controller serves the purpose of monitoring and controlling temperat..

USD85.00

Plastic ABS IP65 Enclosure Waterproof Sealed Electrical Project Box with 3 Glands 200x120x75mm

Plastic ABS IP65 Enclosure Waterproof Sealed Electrical Project Box with 3 Glands 200x120x75mm

Plastic ABS Enclosure Project Box & 3 Cable Glands  4-8mm     &nb..

USD14.50

Hot Tub Spa Water Temperature Sensor fr Winer Jazzi Monalisa JNJ Ethink Kingston Medsa

Hot Tub Spa Water Temperature Sensor fr Winer Jazzi Monalisa JNJ Ethink Kingston Medsa

  Water Temperature Sensor Coolant Probe Gauge Switch 3m (10ft) with temperature r..

USD9.50

1/4" Plastic ABS NTC 10K Sensor fr Underfloor heat thermostat, Air, Refrigerator, Aquarium Waterproof Probe

1/4" Plastic ABS NTC 10K Sensor fr Underfloor heat thermostat, Air, Refrigerator, Aquarium Waterproof Probe

The Sensor works with most thermostats (INCLUDING ALL "WARMUP" THERMOSTATS). Please check the resist..

USD7.99

NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor  Copper Washer Type Probe

NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor Copper Washer Type Probe

This fast response ( copper washer connection )sensor has a wide range of application and easily ins..

USD7.50

Waterproof Distribution Electrical Box Enclosure IP65 Clear ABS Electrical Junction fr Din rail Component with 3 Glands

Waterproof Distribution Electrical Box Enclosure IP65 Clear ABS Electrical Junction fr Din rail Component with 3 Glands

High Quality Material: The shell is made of ABS plastic, the cover is made of transparent PC, the se..

USD15.50

NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor for Air or Water Screw Type Probe

NTC (Negative Temperature Coefficient) Sensor 10K Ohm Thermistor for Air or Water Screw Type Probe

  Specifications:   Measurement range: -58 to 230 °F (-50 to 110..

USD9.50

Waterproof Protection Window Cover Panel IP67 for Electrical Button Switch Circuit breaker Distribution Box

Waterproof Protection Window Cover Panel IP67 for Electrical Button Switch Circuit breaker Distribution Box

High-Quality Material: The shell is made of ABS plastic, the cover is made of transparent PC, and th..

USD16.50

Waterproof Plastic NTC Sensor 10K with 2.5mm connector

Waterproof Plastic NTC Sensor 10K with 2.5mm connector

It will work in water like aquariums and water tanks,...  Specifications:   ..

USD8.50