Shopping Cart
0 items
 

Digital EGT Thermometer 24VDC Pyrometer Temperature Control with EGT Probe 2"

Digital EGT Thermometer 24VDC Pyrometer Temperature Control with EGT Probe 2"
Click to enlarge
Price: $36.99
Availability: In Stock
Model: DTX-24V-EGT
Average Rating: Not Rated

Digital EGT Thermometer 24VDC, Pyrometer, Temperature controller with EGT Probe

This Device use for monitoring or controlling Exhaust Gas Temperature (EGT). It can be powered directly by the car battery 24 VDC (For 12V you need to convertor 12V to 24VDC).  It shows current temperature and also your set point (alarm temperature that you can set it on device). The device will turn on a green output LED in the front panel to get driver's attention if the temperature is above the setting point and also you can set another over alarm for alarm output . So, It has 2 relay switch, one relay output and also one over alarm relay output  that each output switch separately can be used to turn on a buzzer, shut off the fuel, or turn on a cooling fan.  The meter will accept all EGT K type sensors on the market and display the temperature on Celsius.The max temperature range for this device with K type EGT probe is 1300 C

This auction includes an EGT K type thermocouple probe.  The probe has 2” long. Cable length(2 meters) with Maximum working temperature: 1000C .

 

Control Method

PIN control (including ON/OFF, step-type PID and continuous PID)

Self-tuning control

Detective Temperature Range

0 to 1300 °C (with K type)

Display

Process value (PV), Setting value (SV)

Output, alarm and self-tuning can be indicated by: LED

Input Signal

Thermocouple: K,E,S,B,J,T,R,N

Accuracy

±0.5%F.S 

Control Way

Fuzzy PID control, state control manual

Control Output

- Relay output.

* Equipped with a built-in relay (5Amp).

* Out1= Relay (heating side or cooling side selectable).

Alarm output

High limit alarm, lower limit alarm,

below lower limit alarm.

Equipped with a built-in relay 3Amp

Proportional Band

Selectable for control output

Integration time

1-3600 S

Derivative time

1-3600 S

Working Power

24VDC

Out Dimension

48 x 48 x 76 mm

Install Dimension

45 x 45 mm

 
EGT Probe Specifications:
  • Measurement range: 32 - 1800 °F (0 - 1000 °C)
  • Thermocouple Type: K Type
  • Cable length : 6 ft 
  • Sensing tip length: 1.9" (48mm)
  • Sensing tip diameter: 0.19" (5mm)
  • Thread width :  M8
  • Internal Insulation: Fiber Glass
  • External shielding: Metal Shield (Stainless steel braided)

Manual

Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Digital EGT Thermometer 24VDC Pyrometer Temperature Control with EGT Probe 2"
Click to enlarge