Shopping Cart
0 items
 

K Thermocouple with very Fine, Fast Response, Pin Point,Tapered and Flexible Probe Sensor (1.5mm Tip Diameter) - for BGA Chip, LCD test, Jovy Soldering, Solder Iron Station

K Thermocouple with very Fine, Fast Response, Pin Point,Tapered and Flexible Probe Sensor (1.5mm Tip Diameter) - for BGA Chip, LCD test, Jovy Soldering, Solder Iron Station
Click to enlarge
Price: $16.50
Availability: In Stock
Model: TI-FLX-1112
Average Rating: Not Rated

  • This is a very practical and inexpensive Type K thermocouple with a Very Fine Diameter Probe, which can be bent easily or put under any surface or inserted in any hole. 
  • Fine diameter probe provides durability, fast and accurate temperature measurements. 
  • It measures high temperatures up to 1112 °F (600 °C).
  • Its Spring Strain Relief prevents "pinching" of the wire and gives it more flexible moving angles.
  • Diameter of its high quality probe is 0.06" (1.5mm) and is 5.90 inch (150mm) long.
  • Connector of this thermocouple will work with Temperature Controllers.
  • It's easy to clean and easy to use.
  • Typical applications include testing and assessment of testing equipment parts, temperature distribution analysis of ovens, LCD testing equipment, semiconductor fabrication equipment, and automotive testing parts and also it can measure many points in small surface area.

Specifications:

 

 

 

 

 

 

 

Thermocouple

Type K

Temperature range

32  – 1112 °F (0 – 600 °C)

Probe length

150 mm (~5.90 inch) and flexible

Probe diameter

1.5 mm (~0.06 inch)

Cable length

1m (~3.3ft)

Internal Insulation

Fibreglass

External Shielding

Stainless Steel Braiding

Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

There are no additional images for this product.