1 / 5

PID Kit for making Espresso Coffee Brewing Machine (Temperature controller, SSR, J thermocouple)

4.7/5 18 reviews / Write a review

Product Code: EBP-DTXG-J In Stock

USD59.50

Qty

Contact Support Returns Reviews

Description

A Complete & Very Economical Package of Dual Digital PID Temperature Controller, Solid State Relay (SSR) & J Type Thermocouple (Washer Probe) For Espresso Machines

Controlling the brew temperature is a key to espresso quality. This package helps you to control the brew temperature accurately.

By wiring and running this VERY ECONOMICAL package to your Espresso machine (like Rancilio Silvia, Gaggia, Starbucks Barista & etc) improve its brewing quality and enjoy the better taste of your coffee/espresso.

Most machines can't accurately control the brew temperature and the taste of each shot would be different from the other one.

Using this PID Controller with our offered J Type (Washer Probe) and SSR can precisely control thetemperature of your system and gives you the required consistency of taste.

This Ad includes:

Item	Quantity
Dual Digital PID Temperature Controller	1
Solid State Relay (40A), 24-240V AC	1
J Type Thermocouple with Washer Probe	1

Professional Advanced PID Temperature Controller with SSR output & dual display ability °F / °C

This High performance - Intelligent Temperature Controller has a wide range of application and also following features,

Wide Range Selectable input (TC, RTD, Analog) Thermocouple(K,E,J,N,S,T,R,B,) Pt100 ( Up to 649 C ) Voltage and Current (0-5VDC,0-20mA 1-5VDC,4-20mA)

High Measuring accuracy, ±0.2% or ±1 unit of full input range

Wide range of power supply 90~260VAC

Super large and bright LED Display and Dual Line 4 digits display

Alarm standby function

Analog output buffer function

C or F display selected on user’s discretion.

Calibration function for sensor temperature correction

And more functions

Control	1) :P, PID ,PI, PD, ON/OFF(P=0) 2) Auto setting control
Temperature range	-328 ~ 2500 °F (-200 ~2000 °C) - depends on input type.
Display	- Process value (PV) - Setting value (SV): -1999 ~ +9999 - Output (Out1) - Alarm (ALM1) - Auto setting (AT) - Display: LED
Input	K (-200~+1300ºC), S (-50~+1600ºC), Wu3-Re25 (0~2000ºC ), R (-50~+1700ºC), T (0~400ºC), E (0~900ºC), J (0~800ºC), B (200~1800ºC), Pt100 (-200~649.0ºC) or (-200~+600ºC), mV,mA,VDC (-1999~+9999)
Accuracy	Measurement: ±0.2%FS Control Accuracy :+/- 1 Celsius Sampling period: 0.5s
Setting range	Setting value (SV): same range with PV Proportional band/time (P):0~full range (On/Off control when set to 0) Integration time (I): 0~3600 sec (no integral action when set to 0) Derivative time (D): 0~3600 sec (no derivative action when set to 0) Proportional period: 1 ~100 sec On/Off control output hysteretic loop width: 1~100 °C (or other PV units)
Control Output	Out1= SSR (heating or cooling side)Voltage impuls Alarm Output1= built in relay 5Amp/110V or 3Amp/220V
Working Power	90 – 260VAC, 50 – 60 Hz
Other Parameters	1) Insulation resistance: >50mΩ (500V DC) 2) Insulation strength: 1500V AC/min 3) Power Consumption: <10V 4) Service environment: 0~50 °C, 30~85RH, no corrosive gas
Outline Dimension	48 x 48 x 90mm (1/32 DIN)

J Type Thermocouple:

*Thermocouple type*	*J type* *Washer Probe with Inside diameter = 3mm*
*Measurement range*	*32 - 752 °F (0 - 400 °C)*
*Cable length*	*3.3 ft (1m)* *3.3 ft (1m) with internal fiberglass insulation and external metal shield (Stainless steel braided)*