12VDC 2 Zone Temperature Cool or Heat Control fr Pet Animal Dog Cat Reptile Bird Reptile Chick Egg Incubator Alarm

Two zone Temperature Controller

Some animals like Reptiles are cold-blooded animals, so they are unable to regulate their body temperatures on their own. This is why a heating source is critical. Most reptiles need a constant temperature between 70 to 85 degrees F with basking areas that reach over 100 degrees F. So you need to control two zones with 2 separate heater.

This mini Temperature Controller is an excellent, reliable, accurate and convenient multifunction device when you need to control the temperature precisely and constantly. It’s suitable for all equipment which need to control one zone or two zone (separately) for 2 heating or 2 cooling device or one heating and one cooling device. The device is panel mount and you can easily mount on your pet racks, including your snake, bearded dragon, geckos racks. It has a High and low alarm temperature setup with buzzer and flash alarm.

It is an ideal solution for a wide range of professional applications to automatically control temperatures of up to -50 to 120 °C. It comes with two temperature sensors and manual.

Features:

2 relay and 2 sensors with 2 independent zones temperature controller.

2 zones (2 Heating mode, 2 Cooling mode or 1 Heating and 1 Cooling).

2 color display (red and blue) for each zone.

Control temperature by setting the start and stop temperature setting value.

High and Low Alarm function (buzzer and flash alarm).

Refrigerating control output delay protection for Out1 and Out2.

Temperature calibration for each sensor.

Setting memory and factory default setting option.

Technical Parameters:

Temperature measuring range: -50-120

Accuracy: 0.1 Celsius

Power consumption< 3W

Sensors: Two NTC 10K with 1m wire length

Power supply: 12VDC

Output: 2 outputs with 10 Amp load 

2 Temperature sensors Specification

• Measurement range: -50  to 120°C
• Cable length (L): 3 ft (1m)
• Sensing tip length x diameter : 20mmx4mm
• Sensor type: Water proof Negative Temperature Coefficient NTC sensor

One Set Included

• 1 x Mini-Temperature Controller
• 2 x Water Proof Temperature sensor probe with 3m cable
• 1 x Instruction Manual and wiring diagram

Manual & wiring diagram