This heavy duty plug and play temperature controller with temperature sensor, has a wide range of applications for controlling the temperature .It can work for any application of controlling heat and cold with temp range of -50 to 110 C ( -58 to 230 F) and Maximum loading current of 15 Amp.

Main Features:

·          To operate, you only need to plug the heater  or cooler to the socket wire of the controller at the back, drop the sensor into place, turn on the power of controller Box and  setup the controller  to your own requirements.

·          15 Amp Maximum current

·          Heavy duty input and output plug and socket wires

·          Equipped with circuit breaker switch 15 Amp (instead of short life fuse)

·          It equipped with 2 type of timer 

·         Configurable between Fahrenheit or Celsius

·          Heating or cooling function (configurable)

·          It is accurate controller with 0.1 C or 0.1 F resolution controlling

·          Temperature Calibration

.          Equipped with buzzer alarm for high or low temperature alarm setting

This thermostat simply turns off the Heater or cooler when it reaches the specified temperature.

We will ship the temperature controller with 110 V or 220 V versions based on the voltage of your countries. For example, if you are customers from United States, Canada, Mexico, Japan, Venezuela and Taiwan, we will ship 110 V versions. For customers from Europe, Australia, New Zealand, most Asian Countries, South America and Africa, we will ship 220 V versions.

Temperature Controller Specifications:

• Temperature Measuring Range: -50 ~ 110 °C (-58 ~ 230 °F )
• Control temperature range: -50 ~ 110 degree (adjustable)
• Control temperature difference: 0.1 - 25 degree (adjustable)
• controlling Resolution: 0.1 degree
• Timer : 0-999 minute
• Sensor error delay: 1 minute
• Circuit breaker  capacity (Heating or cooling): 15 Amp  
• Compressor delay protection time: 0 ~ 10 minutes (adjustable)  
• Storage Temperature: -30 ~ 75 °C
• Operating Relative Humidity: 20 ~ 85 % (No condensation)  
• Power Supply: 100-120 V AC/DC (depends on your country)
• Power consumption: < 2 W
• Cable length: 3 m (near to 10 feet)
• Equipped with AH or AL buzzer alarm (Higher or Lower temperature alarm setting) 

 Sensor Specification:

• Measurement range: -58 to 230 °F 
• Cable length (L): 10 ft ( 3m ) 
• Sensor type: Water proof Negative Temperature Coefficient NTC sensor  

Notes for customer outside North America,

• For international order, an US power cord is included. User can cut plug and socket wire and change it to the power plug and socket outlet that meets the local standard for the input and output.
• For countries that use 220-240 VAC power line, the maximum control power of this controller is 3000 Watts.

Manual & wiring diagram