It comes with a thermocouple (maximum 2372 F) and TC connector that you can easily change your thermocouple and if you need to change your sensor to a specific one, we can change it for you too.

Press the ON/OFF switch, and start curing the batch. During the heating process, one can use a manual switch to turn ON or OFF the element power if needed. The alarm buzzer can be used as either a temp alarm or a set point finishing alarm. It can also be muted.

If you need any other control switch please contact us. 

 
Features:

• Powder-coated wall-mount metal enclosure box.
• Dual-line display one set point PID temperature controller.
• According to your kiln, you need to select 30Amp, 40Amp or 50Amp.
• There are ON/OFF switches for stopping or resetting operations. 
• Buzzer Alarm and alarm mute switch.
• 2 Solid State Relay and heatsink and fans for cooling the heat inside the box.
• Oven temperature probe with male and female connector.
• 3 Glands for connecting input and output cable, thermocouple.  
• The breaker switch for overload protection and emergency completely cut off power to the panel.
• Adaptor 12V for Fans and Buzzer alarm or other extra applications.
• Thermometer that shows the temperature and humidity inside the box too. 

Description:

The oven can be heated up to set point by PID temperature controller as soon as possible and maintained for a pre-set period to cure the part. When the batch is finished, the coating process can be restarted again by pressing the ON/OFF button. 

Specifications

 Note:

• The control panel is designed for North American 240V AC power lines which require four line power connections (L1, L2, Neutral, and Ground). Please verify your power supply before purchase.
• This control system is designed for heating elements (resistive load) only, not for gas burners or propane heaters. If you want to use the system for a gas burner please check our 110V controllers.
• An input power cord is not included because each user may have different hook-up requirements.
• The heating element is not included.

PID Temperature controller :

High Measuring accuracy, ±0.2% or ±1 unit of full input range, Decimal point function, percentage of output,

Calibration function, Celsius or Fahrenheit display, HY (differential gap), Alarm HY, ....

Please consider that, it takes 7 business days to make your order and then it will be shipped.

Temperature controller manual