• Your shopping cart is empty!

1 / 2

Ramp & Soak Temperature Controller Panel 240V Electric Kiln Oven 30A 40A 50A with 2 Hot line

4/5 1 reviews / Write a review

  • Product Code: PID-RS-CP-220 In Stock
  • USD460.00

Available Options

Choose required options before checkout.

Description

This is a heavy-duty Ramp and Soak Temperature metal control panel for an electric Oven Kiln 240V with 2 Hotlines. The PID controller is a ramp and soak programmable temperature controller with 60 segments for heat treatment. According to your kiln, you need to select 30Amp, 40Amp, or 50Amp.

It comes with a thermocouple (maximum 2372 F) and TC connector that you can easily change your thermocouple and if you need to change your sensor to a specific one, we can change it for you too.

Press the ON/OFF switch, it will reset the temperature controller program. The alarm buzzer can be used as either a temp alarm or a set point finishing alarm. It can also be muted.

If you need any other control switch please contact us. 

 
Features:

  • Powder-coated wall-mount metal enclosure box.
  • Dual-line display ramp and soak PID temperature controller with 60-segment ramp and soak.
  • According to your kiln, you need to select 30Amp, 40Amp or 50Amp.
  • There are ON/OFF switches for stopping or resetting operations. 
  • Buzzer Alarm and alarm mute switch.
  • 2 Solid State Relay and heatsink and fans for cooling the heat inside the box.
  • Oven temperature probe with male and female connector.
  • 4 Glands for connecting input and output cable, thermocouple, and one extra output  
  • The breaker switch for overload protection and emergency completely cut off power to the panel.
  • Adaptor 12V for Fans and timer or other extra applications.
  • Thermometer that shows the temperature and humidity inside the box too. 


The sensor provided in this control panel can handle up to 1832 degrees F.  The base of the probe has a screw and nut for easy mounting on the Oven. The probe is 6" long and 0.2” (5.0 mm) in diameter and made of stainless steel with a plated brass base. The default sensor + connector cable length is 6 ft (2m).


          Heater Control Output           

30A, 40A, 50A   240VAC maximum.

Input Connection

30A, 40A, 50A  with 4 or 3 conductors. 

Sensor 

K Type Thermocouple sensor.

Circuit Breaker

2P 30A, 40A, 50A

Ramp Soak PID Temperature Controller

PID-RS

Dimension (W x H x D)

10 x 8 x 8 inch (27 x 19 x 15 cm) 

Weight

10 lb (4.53 kg)

 

Note:

  • The control panel is designed for North American 240V AC power lines which require four line power connections (L1, L2, Neutral, and Ground). Please verify your power supply before purchase. 

  • Input power cord (SOOW 10/4) is not included because each user may have different hook-up requirements. and there is a simple input and output wiring.
  • The heating element is not included.


Temperature controller features: 


     - Configurable between Fahrenheit and Celsius
      - 30 Ramps and 30 Soaks and time can be configurable between a minute or a second
      - Equipped with a differential gap, decimal point for all input, Auto tuning (with learning stop or start), alarm output configurable with 8 different options, system function (heating or cooling),......  
                                                          

Specifications:

Input voltage

90 to 265 VAC - 50 /60 Hz; No transformer or adaptor is required.

Output voltage

Same as the input.

Maximum Current

40A 2 Hot line

Controller Mode

60 segments Ramp and soak PID control

Output switching device

Solid State Relay (max 20A - 24/240V AC) with zero voltage crossing switching.

Sensor Type

Type K 6pc Ceramic Kiln Thermocouple

Temperature control range

50 to 1300 °C

Thermocouple Thread material

Cr-Ni, Si-Ni

Thermocouple Thread dimensions

3.2mm (diameter ɸ) x 190 mm (long) / (0.13" x 7.5")

Sensor cable length

3.3 ft (1m)

Ceramic tube shape

6 x (1 inch Pcs, two-hole insulator) Ceramic Tube

Ceramic tube diameter

Oval shape: L=12.3 mm & W=10mm (L~ 0.5” & W~ 0.4”)

Ceramic tube length

~150 mm (~ 6.0 inch)

Box material

ABS

Temperature resolution

Dual 4-digit LED display, 0.1 °C.

Temperature display unit

Celsius (°C) and Fahrenheit (°F) configurable

Temperature accuracy

±0.5%F.S

Dimension

200x120x75mm ( 7 3/4 x 4 3/4 x 3" )

 

Please consider 7 business days for making this controller box.

 Temperature Controller Manual

Reviews (1)

4
1 reviews
All reviews 5 star 0 4 star 1 3 star 0 2 star 0 1 star 0
Write a review

Write a review

Optional: upload up to 3 photos. JPG, PNG, or WebP only, 2MB each.
USD460.00 Choose options