1 / 2

PID Temperature Controller Recorder Data Logger SSR Output °C °F + USB RS485 to PC

4.7/5 38 reviews / Write a review

Product Code: PID-SSR-USB In Stock

USD55.50

Qty

Description

USB PID Temperature Controller with SSR output and universal type input with USB

This controller can connect with USB to your computer and you can set the parameters and setpoint temperature, monitor, record and control the process by your computer. The software has a lot of functions like,

-Set the parameters and setpoint temperature

-Monitor and record temperature on Excel or graph by your needed interval time

-Easily Change the setpoint on your computer and upload it on your temperature controller in second

-Change the software setting for your needed reports

-Configurable between Fahrenheit and Celsius Degree

You can extend the USB wire as long as (150m) you want for connecting to your computer. Use this PID Temperature Controller when you wish to precisely control, record, monitor the temperature of a kiln/heater/cooler in SSR output.

This controller is easy to set and comes with a user friendly manual.

The software support windows and does not work with MAC

The item includes: Temperature controller + Free Software + USB Converter (for connecting temperature controller to your PC)

If you need wire for USB Data transferring please click this 26/2 AWG low-voltage wire

Features & Specifications:

AUX output	USB RS485
Detective Temperature Range	-200 to 1800 °C (depends on input type)
Software connection	RS485
Input	Thermocouple: (K,S,E,J,T,B,N) RTD: (Cu50, PT100) Linear Voltage and current:0-5V,1-5V,0-1V,0-100mV,0-20mV,0-60mV,0.2-1V(100-500mV),-20 -+20mV(0-10V) -5V- +5V(0-50V), -100 - +100mV(2-10V) Linear Resistor:0-80 Ohm, 0-400 Ohm
Output	SSR output
Control action	Heating , Cooling
Response time	Less than 0.5S (configurable)
Accuracy	0.2%FS+- 0.1C(Cu50 cooper resistor compensation or ice point compensation) 0.2%FS+0.2C (TC input and internal compensation)
Temperature drift	Less than 0.01%FS ⁰C (Typical value is 50ppm/⁰C)
Resolution	1⁰C or 0.1⁰C(automatically change to 1⁰C when the temperature is higher than 999)
Display	Dual line - four digit - LED display- Configurable between Fahrenheit and Celsius
Decimal points	Configurable for all inputs
Control Method	ON/OFF AI MPT with auto tuning, adopting fuzzy logic PID algorithm
Auto/Manual Control	Auto/manual bump less transfer from front panel
Auto-tuning	Auto-tuning and manual tuning available
Alarm Mode	Absolute value high limit, Absolute value low limit, Deviation high limit alarm, Deviation low limit alarm.
Alarm stand by	In some occasions, for example, in the heating process, when the alarm is set to as low deviation alarm, right after the power is turned on, the alarm will be triggered but there is no problem in the system, the alarm block function can solve this problem.
Soft start function	In some particular application, 100% output ratio is not allowed when the power just turned on; soft start function is a great feature to solve this problem.
Software functions	Change and save parameter settings and setpoint temperature, upload, record, export to Excel, make a graph and .... by your computer, Work with windows
Power Supply	90~260VAC
Dimension (DIN 1/16)	48mm48mm90mm
Mounting	Panel Mount

Manual

If you cannot download the software please right click on the hyperlink to the software and select “open link in incognito window”. And then on the new incognito opened window select the URL address on the URL bar and click enter and it starts downloading the software.

Software