Fahrenheit Limit Temperature Controller Thermostat 2 Zones Switch Heat and Cold with Buzzer for High Alarm setup

DIN330 with 2 temperature sensors for 2 separate zones. Each zone can be used for heating or cooling functions. So the controller is suitable for all equipment that needs heating or cooling control.

Features:

2 separate relays and 2 sensors with 2 independent zones temperature controllers. So, it can also be used as a backup sensor.

2 color displays (red and blue) for each zone.

The record of the maximum high temperature for each sensor or each zone.

Selectable between Celsius and Fahrenheit.

2 separate High Alarm functions (buzzer and flash alarm).

2 timer output delay for Out1 and Out2.

Temperature calibration for each sensor.

Keep Setting on memory and also the factory default setting option.

Timer Delay protection to prevent frequent boot for each zone.

Technical Parameters:

Temperature measuring range: -30 to 300 °C (-22 to 572°F)

Power consumption< 3W

Sensors: Two Sensors with a 3m wire length

Power supply: 100-240VAC

Output: 2 outputs with 10 Amp load 

Sensor Specification:

• Measurement range: -50 to 300 C
• Cable length (L): 10 ft (3m)
• Sensing tip material: washer-type cupper sensor
• Cylindrical sensor
• Sensor type: Negative Temperature Coefficient NTC sensor

Wiring work:

The unit is panel mount design. This unit is supplied with a wiring diagram of how to wire your temperature controller.

One Set Includes:

• 1 x Mini-Temperature Controller
• 2 x Temperature sensor probe with 3m cable
• 1 x Instruction Manual

Wiring &  Manual