12VDC Two Zones Temperature Controller Digital Thermostat for Heating and Cooling Equipment

DIN301 Two zone Temperature Controller

This mini Temperature Controller is an excellent, reliable, accurate and convenient multifunction device when you need to control the temperature precisely and constantly. It’s suitable for all equipment which need to control one zone or two zone (separately) for heating or cooling mode.

It is an ideal solution for a wide range of professional applications to automatically control temperatures of up to -50 to 120 °C. It comes with two temperature sensors and manual.

Features:

2 relay and 2 sensors with 2 independent zones temperature controller.

2 zones (2 Heating mode, 2 Cooling mode or 1 Heating and 1 Cooling).

2 color display (red and blue) for each zone.

Control temperature by setting the start and stop temperature setting value.

High and Low Alarm function (buzzer and flash alarm).

Refrigerating control output delay protection for Out1 and Out2.

Temperature calibration for each sensor.

Setting memory and factory default setting option.

Technical Parameters:

Temperature measuring range: -50-120

Accuracy: 0.1 Celsius

Power consumption< 3W

Sensors: Two NTC 10K with 1m wire length

Power supply: 12VDC

Output: 2 outputs with 10 Amp load 

2 Temperature sensors Specification

• Measurement range: -50  to 120°C
• Cable length (L): 3 ft (1m)
• Sensing tip length x diameter : 20mmx4mm
• Sensor type: Water proof Negative Temperature Coefficient NTC sensor

One Set Included

• 1 x Mini-Temperature Controller
• 2 x Water Proof Temperature sensor probe with 3m cable
• 1 x Instruction Manual and wiring diagram

Manual & wiring diagram